Portfolio Builders
Presentation Binder
>> All Education

BALLOON SIZE*	HELIUM		NITROGEN		AIR COMPRESSOR
	1 OUTLET	2 OUTLETS	1 OUTLET	2 OUTLETS	1 OUTLET	2 OUTLETS
5"	N/A	N/A	0.2 Seconds	0.3 Seconds	0.3 Seconds	0.5 Seconds
	N/A	N/A	90 PSI	75 PSI	75 PSI	75 PSI
9"	0.6 Seconds	0.8 Seconds	1.5 Seconds	1.9 Seconds	1.9 Seconds	3.1 Seconds
	70 PSI	70 PSI	75 PSI	75 PSI	75 PSI	75 PSI
11"	1.1 Seconds	1.4 Seconds	2.8 Seconds	3.7 Seconds	3.4 Seconds	5.5 Seconds
	70 PSI	70 PSI	75 PSI	75 PSI	75 PSI	75 PSI
14"	2.0 Seconds	2.7 Seconds	5.2 Seconds	6.5 Seconds	6.3 Seconds	9.9 Seconds
	70 PSI	70 PSI	75 PSI	75 PSI	90 PSI	90 PSI
16"	3.2 Seconds	4.1 Seconds	8.3 Seconds	9.9 Seconds	N/A	N/A
	70 PSI	70 PSI	75 PSI	90 PSI	N/A	N/A

Dual Sizer settings for inflating 646Q's and 350Q's

BALLOON SIZE*	HELIUM	NITROGEN	AIR COMPRESSOR
5"	N/A	0.2 Seconds	0.3 Seconds
	N/A	90 PSI	70 PSI
9"	0.6 Seconds	1.6 Seconds	1.9 Seconds
	70 PSI	80 PSI	80 PSI
11"	1.0 Seconds	2.7 Seconds	3.5 Seconds
	80 PSI	80 PSI	80 PSI
14"	1.9 Seconds	5.0 Seconds	6.4 Seconds
	80 PSI	80 PSI	80 PSI
16"	3.0 Seconds	7.4 Seconds	N/A
	80 PSI	80 PSI	N/A

Standard Latex			646Q's
BALLOON SIZE*	APPROX. TIME SETTING		SECONDS	SIZE
5"	0.7 Seconds		1.0	11"
9"	1.8 Seconds		1.5	15"
11"	3.3 Seconds		1.9	19"
14"	6.3 Seconds		2.2	21"
16"	9.8 Seconds		2.5	22.5"
			3.0	33"

Standard Latex
BALLOON SIZE*	1 Outlet	2 Outlets
14"	4.2	4.4
	80 PSI	80 PSI
16"	6.6	6.9
	80 PSI	80 PSI

*The above settings should be used as guidelines. Please note that size settings will vary based on user preference, balloon color and manufacturer. To adjust the size of balloon to your individual preference, it is necessary to inflate test balloons. PSI SETTINGS refer to gauge located on adjustable regulator connected to the back of the inflator. The pressure setting controls the speed of inflation. SECONDS SETTINGS refers to the tenth of a second increment readouts on the digital display on the face plate. Important: To insure consistent balloon sizing when using helium or nitrogen, check the size of the balloons every 1/3 of a cylinder of gas. If necessary, increase the size of the balloon by either increasing the time setting or the inlet pressure on the adjustable regulator.