Set Up the Control Box

A. Plug the white Balloon Bulb cord into the control box.

B. Firmly press the Automatic Shut-Off Air Line into the socket on the control box. This insures that if the balloon should accidentally pop, the Balloon Bulb control box will automatically shut off power to the Balloon Bulb.Plug the black power cord into the control box.

Roll the neck of a large balloon down to the body of the balloon.

Stretch the rolled neck of the balloon over the Balloon Bulb until the clear tube is fully covered by the balloon.

Roll the neck down the base of the Balloon Bulb.

Inflate the Large Balloon
To inflate the large balloon, place the base of the Balloon Bulb over the outlet of an Air Force 4 Inflator. When the large balloon is fully inflated, remove the Balloon Bulb from the inflator. The Balloon Bulb has a built-in shut off valve that will seal the large balloon.

Rig and Light the Balloon
Place the Balloon Bulb on top of a conduit and tighten the thumb screw to lock into place. The Balloon Bulb can also be suspended from the ceiling by threading dacron archline through the hole in the base of the unit and tying it securely to the ceiling.