Design Gallery - Cupid's Heart

HOME | DESIGN CENTER | EDUCATION | CATALOG REQUEST | CONTACT

(800) 877-8889
(818) 246-9233


	Air Force 4 Air-Pro Dual Sizer Duplicator 2 Precision Air >> More Inflators

	Confetti Cannon Deluxe Balloon Bulb Set Exploders Mega Cannon The Insider >> More Effects

	Hand Trucks Mini Cart Safety Stand >> More Safety

	Archline Pack Neon Foam Wire Ribbon Dispensers The Black Belt Tying Discs >> More Accessories

	Portfolio Builders Masterpiece Videos Wedding Edition Presentation Binder >> More Education

	Air Force 4 Air Force 4 Insider Tool Clip-On Quick Cutter >> More New Products

Design Center > Step-By-Step Projects

Cupid's Heart
by Sue Marston-Weston, CBA

This is a truly beautiful design that has a dual purpose. Not only does it create a stunning focal point at the wedding celebrations it also has a hidden special effect! Ideally you should create 2 of these hearts that can stand on either side of the dance floor and at the agreed moment the Confetti Cannons are fired ‘showering’ the Bride & Groom with confetti!

Secure conduit pole to the base plate and then secure heart frame to the pole approx 6” below the top of the pole.

Inflate 5” latex to 4” and create 4-balloon clusters. In this design I have created a semi formal spiral. I have consistently used 2 x 5” Ivory in every cluster and have randomly changed the other balloon colour’s, this will create a visually interesting spiral effect that is far less formal than the usual spiral garland. Always remember to start at the centre of the frame and mirror image each side.

Decorate Heart frame with 4” Fuchsia Hearts, and Ivy. I have added small bows to the base of each heart balloon.

Using a soft fabric, pull this through the base of the heart design and allow to gently fall to the ground, this will disguise the pole and add an elegant feel to the whole design. Using more 4” hearts and some under inflated 5” latex balloons, ribbon and ivy create a soft accent that moves from the heart to the base of the design.

Now add the confetti cannon loaded as per the instructions to the top of the conduit pole and hide the lead wire within the design.

To create the cupids arrow, cut the shape of the arrow tail from foam board and paint it black and secure this to the cannon covering the small cylinder and at the end of the barrel secure a 9” Microfoil Fuchsia Heart, I have positioned the heart below the opening of the cannon to ensure that it does not prevent the confetti from firing to it maximum capacity. To hide the mechanics of the cannon, make a beautiful bow and position at the centre of the heart.

Equipment
Precision Air

Products

Conwin Base Plates
Conduit 5’ Length
4’ or 5’ Heart Frame- these can be bought pre shaped or made from a length of Aluminium Rod.
Conwin Confetti Cannon Kit
Selection of 5” Pearl Ivory, Pearl Pink, Pearl Fuchsia, Rose and Pearl White latex balloons. The size of frame that I used required approx. 220 balloons.

4” & 9” Fuchsia Microfoil Hearts.
Silk Ivy
Good quality ribbons
Organza or lightweight fabric.
Confetti
Foam Board

Precision Air
The ultimate decorator's tool, the Precision Air automatically sizes air-filled latex balloons without the use of heavy cylinders, noisy air compressors, or balloon templets.

$1,099.48

Confetti Cannon
Create exciting special effects for: weddings, corporate events, etc.! Conwin's battery-triggered Confetti Cannons are powered by a small rechargeable cylinder using nitrogen or helium gas.

$741.09

sueTheme weddingTheme stepTheme catalog2004summerProject cannonProduct precisionAirProduct

Conwin Distributor Network International Support Service & Repair Center
Request a Catalog Contact Us

Copyright © 2000, 2001 Conwin Carbonic Co., Inc. All rights reserved . View Pricing and Returns Policy.