Design Gallery - Special Effects Column

HOME | VIEW CATALOG | CONTACT | VIEW CART

(800) 877-8889

International Customers


	Precision Plus Air Force 4 Air-Pro Dual Sizer Duplicator 2 Precision Air 60/40 Inflator >> All Inflators

	Confetti Cannons Mega Cannon Balloon Bulb Set Balloon Exploders The Insider Tool >> All Effects

	Aluminum Cylinders Hand Trucks Safety Wall Bracket Safety Stand Remote Set-Ups >> All Safety

	Archline Pack Neon Foam Wire Ribbon Dispensers The Black Belt Tying Discs >> All Accessories

	Portfolio Builders Presentation Binder >> All Education

	Balloon Exploders New Balloon Caddy Speed Inflators >> All New Products

Design Center > Step-By-Step Projects




	Special Effects Column by Jan Iiams, CBA

	This versatile column is great for use with Conwin's Insider and Balloon Exploders, or Balloon Bulbs!



			To cover a pole beautifully, and simply, place Glue Dots® or double stick scotch tape vertically on the pole.



			Place #40 ribbon on half of the adhesive, leaving the other half exposed Wrap the ribbon around the pole and adhere to the exposed Glue Dots® or double stick tape.



			Place the base plate and pole onto a piece of spandex fabric. Stretch and pull the fabric up and gather around the pole, securing tightly with a 260 balloon. Trim excess fabric from the top. Cover the area with two 6 inch heart quads, nitrogen filled with a Duplicator 2 or Dual Split-Second Sizer. Add two more at the top of the pole.



			Holding the end of a 260 balloon between thumb and forefinger, stretch and wrap the balloon around your wrist, inflate the balloon with nitrogen on a Dual Split-Second Sizer or Duplicator 2 to create a beautiful twist but with a small portion still uninflated.

			Repeat the process with a 350 balloon, tie the necks of both balloons together and secure into the cluster at the top of the pole. Wrap the curled balloons gently around the pole, tie the ends together and secure into the bottom cluster. Add a bow and accent balloons at the base with Glue Dots®.



			Top with a 3 foot clear helium balloon filled with 6 inch helium filled hearts using a Duplicator 2 or Dual Split Second Sizer and The Insider. For a fantastic special effect, use The Exploder to pop the balloon on cue up to 100 feet away!



			Or, illuminate this beautiful design by inserting Conwin's Balloon Bulb into a 3 foot white pearl balloon and securing to the top of the pole. Add an inexpensive battery push light inside the spandex.To light the bulb, plug into a power outlet and...let there be light!

Exploders
Conwin's new Pneumatic Balloon Exploders are safe, easy to use and are non-electric and non-pyrotechnic. Large exploding balloons are also great as balloon column toppers and over dance floors!

$375.44

Balloon Bulbs
Create brilliant decor with Balloon Bulbs! Designed by Conwin exclusively for balloon decorators, Balloon Bulbs are a perfect accent for dance floors, entrance decor, buffet areas, or any special location indoors or out.

$274.13

Dual Split-Second Sizer
The Dual Split-Second Sizer's digital control panel lets you easily set and adjust the inflation cycle time in tenths of a second.

$1,052.70

The Insider Balloon Stuffing Tool
The Insider Balloon Stuffing Tool is an accessory item for Conwin's automatic sizing inflators. It's the perfect tool to create balloons for use with Conwin's Exploders!

$85.38

janTheme stepTheme advancedTheme exploderProduct, insiderProduct catalog2004summerProject airForceProduct, bulbsProduct