Start by inflating with air using the Dual Split Second Sizer set on Nitrogen 2 x 3 layer column from 11” sized to 10” Mocha Brown Latex, attach a weight to each base.

Inflate with helium using the Dual Split Second Sizer a 646Q Mocha Brown almost fully, just leave yourself 1” at the end so you have a tying connection at both ends of the balloon, now tie directly into the base column created in step 1, you now need to repeat for the 2nd base column.

Inflate another 646Q Mocha Brown to the same size as in Step 2 and tie this to the fist 646Q attached to the base column in step 2, so you form a floating chain, repeat for the other base cluster. So you end up with 2 x base columns of 3 layers each with 2 646Q coming from them linked together.

 Now you need to helium inflate with the Dual Split Second Sizer 2 x 4 Balloon clusters of 11” Lime Green and attach one in-between the connection of the 2 646Q’s and the other at the top of the second 646Q.  Now repeat this for the 2nd side so they look equal.  Add to each side into the connection points (see pic) a selection of helium filled Foil Palm Fronds, 646Q Emerald Green Latex and air filled 260Q Lime Green shoots to give a palm tree impression.

Now to connect the trees into the arch you need to take a 30” Balloon, for this we have used the Rainbow Yellow and Orange Agate to look like the Sun!!  Fill with 5” Balloons using the Conwin Insider Tool attached to your Dual Split Second Sizer, add some confetti and then inflate the 30” almost fully and tie.

Material List:
28 x 11” Mocha Brown
4 x 646Q Mocha Brown
16 x 11” Lime Green
26 x 36” Emerald Green Foils
13 x 646Q Emerald Green
30 x 260Q Lime Green
1 x 30” Yellow & Orange SuperAgate
50 x 5” Yellow
50 x 5” Red
Confetti

Equipment Needed:
Exploder Kit  
Dual Split Second Sizer